D-130 Dry Mid-Viscosity Injector(Wide use for both steel plate reinforcement and heavy cracks injection)


To make use of the merit of Epoxy to the maximum, D-130 is manufactured for reinforcement of structure and floating parts (loose parts) and for injection
under iron plate. Low viscosity type does not make gaps during injection and it is easy to grout in order to repair the cracks of bridge, dams, columns and slabs.
It contributes to restore the strength of concrete because its physical strength is strong and adhesive strength, anti-corrosive and anti-rust effect is excellent.


  • Steel plate reinforcement and crushing injection.
  • Injection to mechanical loading parts.
  • Filling up the floating parts of the floor.
  • IUse for Repairing the structure tank rack.


  •  Adhere closely to the concrete and iron-plate.
  • Excellent mechanical strength, water resistance & durability.
  • Suitable for injection work using high pressure injector due to its fluidity.
  • Little hardening contraction.


Main Ingredients
Epoxy Resin, Polyamidamin
 Dark Brown
Mixing Ratio
Resin : Hardener = 2 : 1
Pot Life
 90min ± 10 (25℃)
Finger Touch Cure Time
 18hours ± 5 (25℃)
Curing Time
 24 ~ 36hours(25℃)
Application Range
Under 0.3mm monute crack