D-200 Dry Low Viscosity (Small Crack Injection Agent for Concrete Structures)


To make use of the merit of Epoxy to the maximum, D-200 is made for the reinforcement of structure, floating parts (loose parts) and for injection under
iron plate. Low viscosity type does not make gaps during injection and it is easy to grout in order to repair the cracks of bridge, dams, columns and slabs. It
contributes to restore the strength of concrete because its physical strength is strong and adhesive strength, anti-corrosive and anti-rust effect is excellent.


  • Reinforcement to Steel Plate and compression Injection.
  • Injection to mechanical loading parts.
  • Filling up the floating parts of the bottom.
  • Injection to small cracks.


  • Used for both compressing and repairing iron plates as it is low viscosity type.
  • Easily use auto-injector and microcapsule techniques.
  • Low viscosity type for easy stirring.
  • Low viscosity type does not generate during injection.
  • Little hardening contraction.


 Main Ingredients
Epoxy Resin, Polyamidamin
 Dark Brown
Mixing Ratio
Resin : Hardener = 2 : 1
Pot Life
90min ± 10 (25℃)
Finger Touch Cure Time
18hours ± 5 (25℃)
Complete cure Time
24 ~ 36hours (25℃)
Application Range
Under 0.3mm monute crack